Lighting Layouts, Lighting Design, Area Lighting

A simple lighting layout created from an auto-cad file. This project was completed in one hour. The project has five pole mounted fixtures for site lighting as well as eight wall mounted fixtures for area lighting. 

This portion of the campus covers an area roughly seven acres. The hospital was considering an LED lighting upgrade. In addition to their parking lot security lighting needs, they needed to maintain 1 foot candle illumination on the walk ways. On the pseudo color report page, the limits are set to 1 foot candle. Everything in red is greater than 1 foot candle. This Project was completed in just over three hours.

This lumber yard has seven buildings on a property covering seven acres. New LED fixtures were installed on existing poles as well as rooftops and wall packs. This project took three hours to complete.

The project was hand drawn on a google maps image and turned into a 3D lighting design. This project was completed in three and one quarter hours. 

Bright, overlapping area lights in the front of the property, further spaced and higher poles in the rear of the property.

This project was a lighting retrofit. The client had floor plans as well as reflected ceiling plans in pdf format. The pdf plans were loaded into the lighting software and used to develop the 3D study you see below. The study was used to determine appropriate fixture wattages to use in various areas of the store. A second report was developed for the emergency lighting layouts. First report was developed in three hours. The second report was developed in two hours. Grand total for the project as a whole was five hours.